AutoBlanket I
The AutoBlanket I
Erosion Control Equipment
The AutoBlanket® Erosion Control Staple machine is a hydraulically driven implement designed for a medium to large landscape grading tractors or skid steer loaders with a minimum of 12 gpm hydraulic flow. The tractor/skid loader powerplant hydraulically engages the various machine movements with a touch of a button on the cab-mounted PLC. The auto-float engages the machine. The lift will disengage and also lift the machine while powering the hydraulic motor which engages a 25CFM aluminum block Atlas Copco compressor. The PLC enables the operator to determine staple patterns, turn the compressor on/off, and reset a daily blanket counter. The Auto-Stapling function allows the operator to fire all five guns at the press of a button. The AutoBlanket® can vary the distance and spacing of each staple and enables the operator to choose from an infinite number of staple patterns when installing the erosion control blanket.
Remote Controlled Staple System
Enables the operator to choose from an infinite number of staple patterns when installing the erosion control blanket.
3-Point Hitch Attachment
This allows the tractor/loader and The AutoBlanket® to flow over the ground independently of each other when encountering berms and sloped corners.
Products You Can Trust
Nordloh Industries
Thomas Nordloh’s vast experience in the landscape industry has brought about the design of a machine that will install erosion control blanket on various types of terrain. The 3-point hitch attachment has been modified to let The AutoBlanket® articulate up and down. This allows the tractor/loader and The AutoBlanket® to flow over the ground independently of each other when encountering berms, sloped corners, and detention/retention ponds. The 5 compression wheel assemblies that hold the pneumatic stapler independently float 18” up or down depending on the terrain. This enables The AutoBlanket® to install erosion control blanket on many different types of terrain.
